Description
AtisAcer 80 is the newest member of the Atisacer family, provided with a double rope system and a pneumatic cylinder. It completes the range of Atis’ rope system manipulators.
The manipulators pneumatic system allows balanced movements, both with and without load. Integrated with standard hooks or with special gripping tools Atisacer gives its best in small and constricted working areas.
The manipulator is provided with certified accumulation tank to allow the operator to carry out the handling process in case the main air supply fails. It’s furthermore provided with double safety ropes. It mounts double braking pads on the main axle and the medium joint as well.
Atisacer 80 turns out to be very easy to handle, lightweight and quick-moving
Technical characteristics:
– Operation: pneumatic only
– Transmission: double rope system
– Configuration: column mounted fixed to the floor | column mounted on self standing base plate | fixed overhead | overhead on rails
– Net capacity: 80 kg (radius 3100 mm)
– Radius maximum: 4000mm (maximum load 40kg)
– Radius minimum: 400mm
– Vertical stroke: 1800mm
– Supply: from 0.5 to 0.8 MPa / from 73 to 116 psi of clean, dry and oil free compressed air
– Column axle: 360° continuous rotation
– Intermediate axle: maximum 300° rotation
– Noise level: <70 dB
The values are purely indicative and may be increased and decreased from our technical department to suit specific customer requirements
